Do You Need a Permit for a Driveway in Evansville, IN?

Last reviewed November 2026. Based on the Evansville Municipal Code, Chapter 12.05, as published online. Rules and forms change, so confirm with the offices below before work starts. General information, not legal advice.

Short answer: inside the City of Evansville, you generally need a Board of Public Works permit to build, change, or maintain a driveway that crosses a public sidewalk, or to cut, alter, or remove the sidewalk or curb for a driveway. Your plans go to the City Engineer first. Work that stays entirely on your own lot is a different question, and county roads and state highways have their own offices.

Quick Reference: Which Permit, and Who to Ask

Your situationWhat the code or form saysWho to contact
Rebuilding the part of the driveway that crosses a public sidewalkPermit from the Board of Public Works; plans and specifications go to the City Engineer first (EMC 12.05.240)City Engineer, then Board of Public Works
A new, widened, or moved driveway, or any cut, change, or removal of the curb or sidewalkSame permit. The owner pays for curb-cut improvements in full (EMC 12.05.050)City Engineer, then Board of Public Works
No sidewalk at the street (the strip between the curb and your lot line)Written application to the Board of Public Works to build or pave across it; the board may grant it (EMC 12.05.250)Board of Public Works
A driveway culvert or fill in a roadside ditch or drainage easementA drainage permit may apply (EMC 12.05.200); the board can waive the engineer-certification requirement by ruleCity Engineer, Board of Public Works
Rebuilding only the part on your own lot, not touching the sidewalk, curb, or street stripThe driveway-permit rule is written around the public sidewalk and curb, so confirm before you assume none is neededCity Engineer’s office
A county road outside the cityA county road-access permitVanderburgh County Engineering Department
A state highway connectionA state driveway permit (INDOT driveway permits)INDOT
Adding a garage, carport, or other structureAn Improvement Location Permit and building permits may apply (Area Plan Commission form)Area Plan Commission, Building Commission

These are summaries of published documents, not approvals. Ask the office for the current forms, fees, and timelines.

What the City Code Requires of the Driveway Itself

  • The driveway cannot block free and unobstructed passage over, on, or across it.
  • It cannot interfere with the proper drainage and safe grading of the street.
  • It must be kept well paved and in a good state of repair.
  • During construction, barricades and warning lights are required from one hour after sunset until one hour before sunrise (EMC 12.05.240).
  • Water other than normal rainfall runoff may not flow from your property onto a public way (EMC 12.05.120), so plan where the driveway drains.

Our driveways guide covers slope, drainage, and what to specify, and our replacement guide explains the process.

Who Pulls the Permit, and Who Pays

  • Ask your contractor. Ask who applies, whether the permit fee is in the quote, and how long approval usually takes before work can start.
  • Contractor license. The code requires a license and bond for anyone in the business of laying concrete in the City’s sidewalks, streets, and public grounds (EMC 12.05.260). The Board of Public Works may also require a bond or certificate of insurance for sidewalk construction (EMC 12.05.230). Ask for proof of both. The code cross-references a separate contractor-licensing chapter (Chapter 5.70), so ask the Building Commission whether anything else applies.
  • Curb-cut costs. If you have an approved curb cut and redo the driveway, or extend a walkway between the sidewalk and the curb, the owner is fully responsible for those improvements and must get all necessary approvals. The cost can be added to the sidewalk billing and paid the same way, and the City does not share it (EMC 12.05.050).

For help checking a contractor, see our contractor-check guide.

What Happens If Work Starts Without a Permit

The code says anyone who violates the chapter is subject to the penalties in EMC 1.05.180 and is responsible for repair and cleanup costs. For disturbing sod, earth, or pavement along a public way without permission, the fine is not less than $250 nor more than $2,500 per violation (EMC 12.05.560). Penalties as published may have changed, so confirm with the City. If a contractor says no permit is needed for work on the public sidewalk or curb, ask them to point to the rule.

Step by Step: Before You Sign

  1. Look at where your driveway meets the street. Is there a public sidewalk, a curb, or a grass strip?
  2. Decide the scope: same footprint, wider, a new location, or a changed curb cut.
  3. Ask each contractor whether any work touches the sidewalk, curb, or street strip, and who pulls the permit.
  4. Call the City Engineer’s office or the Board of Public Works to confirm what applies and what plans they need.
  5. Make sure the permit, fee, and timeline are written into the contract.
  6. Do not start until the permit is issued, and keep copies of everything.

County Roads, State Highways, HOAs, and Zoning

Outside the city, county roads go through the Vanderburgh County Engineering Department, and state highways through INDOT. If your neighborhood has an HOA, its rules may restrict materials, width, or placement. Zoning rules may also limit driveway width or parking pads, so ask the Area Plan Commission before widening. See our service area page for how city and county contacts differ.

Questions to Ask Your Contractor

  • Will any work touch the public sidewalk, curb, or the strip beside the street?
  • Who pulls the permit, and is the fee in the quote?
  • Do you hold the City’s sidewalk contractor license and bond?
  • How long does approval take, and will it delay my start date?
  • What happens if the City asks for changes to the plans?

Driveway Permit FAQs

Do I need a permit to replace my driveway in Evansville?

If the work includes the part that crosses a public sidewalk, or any cut, change, or removal of the sidewalk or curb, the municipal code requires a Board of Public Works permit, with plans going to the City Engineer first. If the work stays on your lot, confirm with the City Engineer’s office.

Do I need a permit to widen my driveway?

If you change the curb or sidewalk for a wider approach, yes. Zoning and HOA rules may also limit width, so ask the Area Plan Commission and your HOA.

What if my street has no sidewalk?

The strip between the curb and your lot line is called a sidewalk park in the code. Building or paving across it needs a written application to the Board of Public Works, which may grant it.

Who pays for the curb cut?

The owner pays for curb-cut improvements in full, and the City does not share the cost. It can be added to the sidewalk billing.

Does my contractor need a license?

For concrete work in the City’s sidewalks, streets, and public grounds, the code requires a license and bond. The code lists a $10 annual fee and a $5,000 bond, but those amounts are old and may have changed. Ask the contractor for proof.

What if I live outside the city limits?

A county road involves the Vanderburgh County Engineering Department, and a state highway involves INDOT. City rules like these do not apply outside the city.

Sources: Evansville Municipal Code, Chapter 12.05 (12.05.050, 12.05.120, 12.05.200, 12.05.230, 12.05.240, 12.05.250, 12.05.260, 12.05.560); Evansville-Vanderburgh County Area Plan Commission, Improvement Location Permit application; INDOT, Driveway Permits. General information, not legal advice. Confirm current rules with the City Engineer, Board of Public Works, Area Plan Commission, county, or INDOT.

Planning a Driveway Project in Evansville?

Tell us about your driveway project to request a quote from a local concrete service provider, and ask about permits when you talk with them.

Helping homeowners in Evansville and Vanderburgh County, Indiana.